All of the curves are now assembled and I have started putting in the wood putty and dowels to prepare them for sanding. The last curve came out as the most perfect…I suppose that should be expected.
Below is the picture of all 8 curves stacked up with weights on top to keep them from warping as they settle. The curves are sitting on the board that I used to hold the jig and you can see the holes in the wood where pegs use to be in place. If I need to build a new curve, I can always put the pegs back in the board and lay out a curve. In this picture, you can also see that the curves have the raw dowels sticking out for every cross member. I will use the sanding table to sand off the dowels and finish everything off to be even and smooth.